Compressor Hoist CH2
Built to last a lifetime of service! Solid steel construction.
By using the "Buy Now" button, buyer agrees to all terms and conditions
listed on legal page and that buyer has read and agreed to same.
*Top of the line American made brake winch.
*5 year limited manufacturer warranty on U.S. made top of the line winch.
*Brake winch allows raising and lowering, will not kick back or spin out of control.
*Made from 1 ½ inch 14 gauge or .083 tubular steel.
*1/8 inch thick feet channels distributes weight over a total of 24 inches of ladder rungs. Feet are 12 X 2 X 2 inches inside dimensions each. Industry standard rung spacing of 12".
*POWDER COAT paint on hoist. We try to choose light colors to reflect the sunlight and keep the tools as cool as possible.
*With approx. 50’ of 3/16” heavy duty galvanized cable.
Safety pin on bottom foot channel to lock hoist to ladder.
*250 lb load limit. Please consider total weight including lift, and DON'T exceed ladder restrictions and weight limits.
*Hoist weight is approx. 32 pounds
For lifting compressors, tools, condensing units, recovery units, vacuum pumps, tanks, or you name it up to the roof.
Can be used for any number of trades from roofers to the homeowner. More robust than other units and more economical.
Comparable units sell for over $1000.00 dollars retail price.
Place lift on last two rungs of ladder and hook item to be lifted to cable end, climb ladder and winch item to roof and set it right down without all the sweat and risk of getting hurt carrying your tools, compressor, and tanks to the roof. Should be used with a heavy duty ladder only!